Posted by

Lenovo G575 Recovery Cd Download

Lenovo G575 Recovery Cd Download

Amazingly, when it comes to computer errors, when your computer boots to black screen with blinking cursor is far better than just a plain blank screen when the computer boots. We have to look on the bright side here and presume that the fact that you can see a blinking cursor is a good sign. At least we can treat this as a bit of clue on what to try when troubleshooting this black screen on start up. When the average computer user sees a black screen on startup appear on their computer monitor panic immediately sets in. Both black screens and blues screens are known disasters that are dreaded by most.

Easy Recovery Essentials works with any Lenovo computer model and it's compatible with the following Windows versions: Microsoft Windows 10 (read more on our Windows 10 Recovery Disk and Repair Disc Download article); Microsoft.

Lenovo G575 Recovery Cd Download

But as I said, seeing a black screen with a flashing cursor is not that bad. Please note that this particular error has stopped your computer from entering Windows. It is not a black screen with a movable mouse cursor on the screen it is a black screen with a flashing cursor that has not entered Windows yet. If this error does not suit your symptoms please see “My computer has a “” for more information. Please note that the you can with a boot disc especially made for this error. Of course you can try everything listed below first as you might get lucky!

🙂 Computer boots to black screen with blinking cursor – Common causes There are many possible causes when your computer boots to black screen and I will try to mention as many as possible. Some causes of a black screen are incorrect shutdown of your computer, not waking from sleep mode, not knowing where to boot to, corrupt software, damaged start up, and the list goes on. When moving forward with these troubleshooting tips, make sure you do have a computer that boots to a black screen with a blinking cursor.

Otherwise you are looking at the wrong tutorial. The last sleep transition was unsuccessful: This is one that I have had a lot of experience with. People have the Windows sleep mode enabled on their computer and after to going to sleep, the computer does not wake up. This sounds crazy, I know.

I have written an article on the from sleep mode. In this example it is also possible to see a pc blank screen where there is nothing but a black screen and that’s it.

When your computer will not wake up try starting your computer in safe mode. Simply start your computer and hit either the F2, Del, or sometimes the F10 key on the keyboard.

When you enter Safe mode you should then shut your computer down correctly. A clean shut down. This should wake up the computer. Then you should disable the power saving mode as soon as you can because it will most likely do it again next time. To adjust your power saving sleep mode go to the control panel, then choose the power options icon. Computer boots to black screen with blinking cursor – A device is connected Did you leave a USB flash drive connected to your computer or maybe an external hard drive?

Either way, the computer might be trying to boot to this device but it is not a bootable device. Remove all devices and try to start your computer again. Below in the comment section one person had a card inserted into a printer and the computer was trying to boot to that so you really need to look outside the box for this step. Faulty Device causes the computer to boot to a black screen Another cause could be that you have a faulty device such as a DVD drive or CD drive. The computer is trying to find all devices connected to the computer and comes across a problem device. This often causes a black screen with a flashing cursor.

If you disconnect the faulty DVD drive your computer can start without errors. People are often aware of a faulty DVD drive because you might have had previous problems removing discs or opening the contents of a disc. When you see a black screen with blinking cursor you can almost come to the conclusion that your actual computer is fine because it is still running but just not loading into Windows. As we have seen, there are a number of causes which also equally creates a number of solutions. Years ago I had a computer that was hit and miss when starting up. Sometimes it would boot to black screen with blinking cursor and then other times it was fine.

It turned out to be the cd drive. The computer was performing and was not finding the cd drive occasionally. As soon as I disconnected the faulty drive, the problem never surfaced again. Your boot options have mysteriously changed It’s probably not a mystery, however for some reason your computer is trying to boot to other devices and not your hard drive. You can restart your computer and get into your bios to change these settings.

When you are in your bios, change the boot order or boot priority to the first being the hard drive. Exit and save your settings. This error can happen when the computer is not shut down correctly or you have another device plugged in. You recently installed new software, updates, or drivers Getting a black screen with a flashing cursor is very common after installing new software, downloading updates, or even installing new drivers and devices. If this happens and you have either Windows Vista or Windows seven, your first port of call would be to insert the operating system disc.

Although Windows xp is a bit more difficult to deal with, both Windows seven and Vista will repair most problems for you. This is why you should try this method first.

This can happen after installing almost any piece of software including Windows updates, believe it or not! The problem is, if there are two programs clashing, there is not much you can do to stop this.One has to go. The God Who Is There Schaeffer Ebook. For this reason, when installing absolutely anything on your computer, including a simple toolbar, I recommend you create a restore point for safety reasons. Imagine if everyone actually stuck to that rule???

Anyway, if you see that flashing cursor you are almost guaranteed that your computer will boot from a CD or DVD. After all it is looking for something to boot to. Of course at this stage, when you see the flashing cursor, it is too late to insert the CD, and it is too early for other remedies. When you insert your operating CD you must restart your computer. See the following instructions.

You upgraded your hard drive and now you see a blinking cursor You installed a larger hard drive and now you have a black screen with a blinking cursor. If you put the old hard back in the computer it runs fine. This is a common problem for Dell laptops and some desktops where the BIOS does not like hard drives that are larger than 127GB.

To fix this problem you can install a smaller hard drive for the main operating system or partition the one you have so that the main drive does not exceed 127GB. Computer boots to black screen with cursor windows 7 – Restore your Windows 7 computer If your computer boots to a black screen when using Windows 7 you can always try to recover a working system by using your Operating system disc! Boot from the Windows 7 operating system disc. If your computer is not set to boot from cdrom first then you need to be able to. Choose your language from the list. Choose the Repair your computer option on the install now section.

Choose the System restore option. Choose a restore point. If you have installed a program today that caused a problem choose a restore point prior to that?

Let it take you back to when you didn’t have a problem. These instructions above will work for Windows Vista as well. Also see this article on.

If you do not have your original operating system cd then try this one: Computer boots to black screen with mouse When your computer boots to a black screen with a mouse cursor, that means that you have logged into Windows. This is a different problem from the one described above. If your computer boots to a black screen with blinking cursor and you have not logged into Windows, there are different troubleshooting steps for this. If you are seeing a black screen with a mouse, and possibly you could move that mouse cursor around the screen, then I have a few things for you to try. • You could login to another user account to see if that user account has the same problem.

• You could enter task manager by hitting the CTRL ALT DEL keys on your keyboard. Then you could go to the applications tab and press on new task. Type in explorer.exe to see if that works. Notes on having a black screen with a flashing cursor: • This black screen tutorial has been split up into separate sections as people are getting confused with what to try for their actual problem. • This tutorial is not about a black screen with a movable mouse cursor on the screen (although I have mentioned it above), it is about when computer boots to a black screen with blinking cursor and has not entered Windows yet. • There is a difference between a total blackscreen and black screen with a blinking cursor.

One has a sign and one doesn’t. • More options when dealing with a pc blank screen: Buy the Ebook “” (Now FREE) Let us know about your computer black screen with blinking cursor experiences below as there are many more causes and solutions to learn from. Also see these extra. I have dell inspiron 1545 Laptop.Last year i replaced my original HDD and Battery with a china made (economical but might be the headache now) HDD and battery.It worked fine for 1 year. Day before yesterday after i shut down my laptop and the next morning when i switched on my laptop A BLINKING CURSOR came up on TOP LEFT MOST CORNER.

Swicthed off laptop>>took out battery>run laptop on main power>clicked f2 f8 f10 etcdel.didnt work 2. Plugged in battery, charger both and then clicked f2 f8 f10 didnt work. Took out battery and charger >clicked power button for 30sec >then plugged in charger >on the laptop>clicked f2 f8 f10(suggested by some website).

Some says my hdd has died out I dont wanna lose my data (very imp) help me out • says. I am having problems with my mum’s laptop and wondered if you could advise me please!

On start-up I have the black screen with cursor. Tried F2 and got a page with ‘hp advanced system diagnosis’ but no safe shut down option anywhere (just start up/run in tests etc)- F10 and there is the blocky safe mode I think you were talking about. (InsydeH20 setup utility whatever that is!!) Again I can’t see an option to shut down just security/diagnostics/syst configuration/exit -help! Can you give me any advice on what best to do- have no clue about these things but would like to give it a try myself before taking it somewhere in case its something easy to fix!!

Thanks in advance! I have a Dell Laptop, I think it says Inspiron on it. Clearly, I’m not anywhere close to being an expert on computers. Anyway, like everyone else, I’m having the issue with the black screen and blinking curser. I was doing my usual thing on the internet and suddenly, my anti-virus says I have a virus and I need to get rid of it. So I click ok and it restarted my computer (it does that sometimes, I recognize that it’s the anti-virus I use because of the logo). When it starts again, it shows the Dell logo, loads, and then gets stuck at the black screen with the blinking white curser.

I have tried: – force shut down and trying again, hoping for it to load – attempted to get to this bios with del, F1, F2, all the Fs in general, escape, and possibly my whole keyboard.-” none of them worked – spent a few hours attempting to find a recovery disk. It didn’t work.

– went through the whole list of comments trying to find something that worked. It didn’t – spent another few hours trying to find help over the internet with another computer (I’m borrowing it temporarily, but I am PANICKING about my computer!) – I tried waiting half an hour at first with it unplugged. – Tried taking out the battery underneath the monitor, waited 2 minutes, then put it back. Nothing different happened. – And when I try pressing too many keys on that screen, it starts beeping for every key that I push. So far, nothing has made any effect in changing anything about the black screen with the white blinking curser. I have tried anything suggested that I could.

I’m PANICKING and EXTREMELY WORRIED and FREAKING OUT all at once. It’s frustrating..

Thank you so much for replying! I am still panicking. I can’t get to Safe Mode and I tried every key listed in the instructions. F8 won’t give me any response on the black screen with the blinking underscore or when it says the “F2 for Setup” and “F12 for Boot Options” However, I have found out that if I hold down the F2 button or the F12 button at the specified time, the BIOS finally comes up.

On the other hand, I can’t figure out how to go from there. I am having trouble following the instructions above because I can’t seem to find the right thing. When I go to Boot Sequence, the order is: -Diskette Drive -Internal HDD -USB Storage Device -CD/DVD/CD-RW Drive -Onboard NIC (This one’s box is unchecked, so it’s not on the list.

The rest are in that order for default too.) Is there a way to get to Safe Mode from the BIOS? And I don’t know if I have a recovery disk or not and where it is. (Unless you are talking about a completely blank disk.

I found something about that on the Dell website yesterday, but I have no clue about the disk burner and apparently it only works if you are already in the Windows.) My keyboard is working, I think. There isn’t a good way to check since it’s in the laptop and all. But if I press random keys enough times, it starts making a beeping sound for every key that I press. I know the F2 and the F12 keys work now. Same goes for the arrow keys and the enter key. You can set the boot order to put the internal hard drive first.

You need to read the instructions on the screen in the bios to tell you how to do this. Please take a good look around and you will see the instructions. The changes only work if you actually save them when leaving the bios. Also disable the option to boot from a floppy.

See what happens when you have done this. If nothing changes. Then start your computer again and quickly press the ESC key then keep pressing f8. If you cannot get into safe mode then the virus has taken more than we think. You will need a repair disc. Which Windows are you using?

I think it is a Windows 7 and nothing happened. I asked about the repair disc/Windows disc. Turns out, the disc itself was originally built into the computer and it should exist in the computer somewhere? I am not clear on all the details about that, but apparently, we never used a disc to begin with. Do you know anything about that situation or do you know how to get to it? It’s still going to the black screen with the blinking underscore and it’s starting to really get on my nerves. When you said to disable the option of booting from a floppy, you meant to uncheck the thing that says USB Storage Device, right?

I just want to make sure I’m not messing something up accidentally. Wait, is it possible to buy a repair disc from a nearby store or something? I’m not sure how it will work out. • mayra says. Hey there here is a completely new simptom i have on a computer the infamous “Black screen with blinking cursor” immediately after starting the pc First, i thought it was a hdd problem, so, i tried with a new hdd, same problem, BIOS sees the hdd both of them, and the CD-Rom boot order is correct, it won`t boot without the cd rom, with it, with the original hdd, with another hdd no usb devices attached, new data cables tried on both controllers and again. BIOS sees everything, but, still won`t boot so please, if u have any ideea it`s very much welcomed • Eric says. Black screen with flashing _ in upperleft corner.

Issue: Was on the internet – did nothing at all different than any other time, watching a video on YouTube computer spits out error msgs about Write Error?? Action: Tried the System Restore something didn’t work as now the above problem is occuring. Cannot: – get F8 to work – have no orignal disk / DVD that came with computer. Only Drivers and Drivers / Utilities disk that don’t even open – changing things in F2 won’t work / F12 won’t work – tried regular vs. USB keyboard – no difference – tried F10, ‘delete’ nada – basically. NOTHING works from startup, and screen constantly stays at the above problem stage.

Very frustrated with a computer that just craps out when nothing differently was done from one second to another 🙁 • AUSTIN FREEMAN says. Hi i have a HP pavilion Dv6748us and i am have a problem with it.

I used it in the day good and in the even it wont come just a black screen and the lights for the power, speaker and the other control lights are just blinking.It like the computer want to start up and it wont start. You can see the fan starting and stopping. If you press ctrl, alt and delete the light will stop blinking and they will stay on and the fan will stay on but you will still have a black screen.Can someone tell what can be causing this problem.

I tried heating around the video card but nothing. • Amber says.

This is what worked for me after trying tons of suggestions. I booted with the windows cd.

Deleted the recovery partition which in my case was 10gb, just enough to install Windows Home Premium. Installed Windows to that 10gb partition. Then I was able to access my files, back them up, reformat the whole drive and reinstall windows. What would have been easier would have been to remove the hard drive, use a drive adapter and copy all of the info off the drive to another computer. Put the drive back in and reinstall windows after deleting all partitions from the windows install screen.

Either of these scenarios would have destroyed the recovery partition but I wasn;t able to access the recovery files anyways. Bottom line, there was a boot problem that fixed itself when I formatted the recovery partition. I’ve been having the problem that’s being described on my desktop here where my computer turns on then goes to a black screen with a blinking cursor, but should there also be a green vertical line on the side of my monitor as well? Well if that is normal, I have tried restoring my computer to one of those automatic restore points that Windows creates when updating and my computer still had not been able to go past the black screen and I have not recently installed any programs into my desktop. I was just using the internet on day and all of a sudden my desktop just began shutting off. I turned it back on like 5 minutes later just to the black screen. I also do not have any external drives on my desktop as what you said in the arrival above of which may be the problem to some computers.

Please help because I have no idea on what I should do. • Liana says. My problem was that I was downgrading from Windows 8 Release Preview, and I had a power failure durring the process. The I received the Black Screen with flashing curser. I went into my BIOS and loaded all of the defaults. Went in and it said that their was no OS installed. Because I have a net book, I didn’t receive a Boot Disk.

But I recently found out Legaly, I can download my original OS from another computer as an ISO file, move to my 1TB External Drive, plug it in and changed my BIOS, and TaDa! Dell Inspiron Duo, Windows 7 Home Premium 64 bit. Thank you so much for all your positive, encouraging, fun way that you direct people to the problem and the detailed solutions. The way that you share your personal experience and information is so helpful and refreshing to make a person think that they can fix their computer problems. With your amazing help, we finally (after disconnecting the flash drive to no avail) opened our minds to the solution: unhook the auxiliary printer!!! Wow, thanks you just saved us $100 for tech support!!! • Notgoodwithcomputers says.

Hello, i first want to say that im not very tech saavy and that my problem occured after installing a windows update. After reading your article im convinced that it was the update and that booting with a windows 7 os disk will repair it, but i dont know if that will wipe my memory or just take the stupid flashing dash in the top left of my screen after i turn on my computer. Im using a toshiba laptop less than a year old and i really need what i have saved on it for school. Please help me out and thanks in advance. • Raquel says.

My quick solution to black screen with just a flashing cursor was to use Hiren’s Boot Disk and a program on it called “Plop Boot Manager”. Apparently, something was preventing my Windows Xp from properly booting. This Plop Boot Manager, within a click of the mouse, was able boot itself and find and boot my windows. Pretty neat since this is the first time seeing my screen since getting the Blue Screen of Death when my computer would freeze at “loading your personal settings” then BSOD.

Here are the steps I took to recover. Found a copy of Hiren’s Boot CD 15.1 with over 2 gb of programs and burned to a dvd that became my boot disk.

Within HBCD, I used Mini Windows XP – from there in the programs list, I used Acronis software (disk director and true image) to 1. Create a clone disk of my “master” hard drive. Since I had 2 of the same computer, creating a clone of my hard drive allowed me to have 2, one as a plug and play “test” environment and backup copy. After sure I had a clone and files backed up, I wiped/scubbed my hard drive test drive to DoD standard using Acronis.

Then created a new partition using Acronis Disk Director. Now the new partition was new viewable by Acronis True Image. This allowed me clone from “master” to this drive that had just been scrubbed. Now the test, try to boot it, and I came to a black screen with flashing cursor. In HBCD, I used Plop Boot Manager, and like magic, in 1 click, it found the windows boot screen where it booted like normal. This time only that it booted all the way normally with no BSOD. Hello Mitz, can you help?

My friend’s Acer Win XP Pro hard disk is dying (some errors even after chkdsk), she’s lost the restore CDs that I made for her 6 years ago, and of course the software won’t let me remake ’em. So I restored from the recovery partition then cloned the disk onto a new one using Ghost v9 on my PC.

I set Ghost to make the new drive bootable, but it isn’t: I get the black screen with flashing cursor. Here’s what I’ve done so far, all to no avail: – I checked that the PC will boot from the restored old disk (so I know that drive boots) – I ran fixboot in the recovery console – I ran fixmbr in the recovery console (it said the boot sector was non-standard, but I ran it anyway) I might try recloning using a different utility like clonezilla, in case this is a Ghost problem. • Crystal says. Man, I was hoping I wouldn’t have to post here, but I’ve tried a whole lot of these solutions and nothing has worked. Mine is an MSI GT laptop; it’s new(ish), and second hand, and I’m pretty sure this is my fault, because when it arrived I decided I wasn’t satisfied with how it was setup and proceeded to reinstall Windows 7.

It booted up great the last time I used it; I installed all the updates, installed all the drivers, restarted it a couple times, and it was working like a charm. Then I put it into hibernation and left it alone for a day, and now I have the blinking black screen cursor of evil. As to what I’ve tried so far: 1) I can’t get into the BIOS. When I restart, it doesn’t say “Press such and such to get into the BIOS!”, and nothing I press works (I think MSI almost exclusively uses Del, but in a fit of maadfobdogbd I also tried lots of other keys.) For that matter, I also can’t get into safe mode. 2) As far as I know there’s nothing wrong with the keyboard. I can actually adjust screen brightness with it. There’s nothing connected to the computer.

3) The Windows OS CD doesn’t work. It seems to think about using it, and whirrs around with it for a bit, but I never get anywhere other than black screen, blinking cursor.

I’ve tried both Windows 7 and Windows XP, but nope. Sorry for the trouble. Hope you can help!

• Crystal says. So I managed to get into the BIOS. It looks like it was a Win7 hibernation problem, and I couldn’t get into the BIOS because (obviously) when you’re in hibernation you’re supposed to start up from hibernation and shouldn’t be in the BIOS (or safe mode, or anywhere) in the first place. What I did was that I dug up my giant box of computer parts and found an old hard drive that had Windows installed on it. It wouldn’t boot from a USB or CD, but it did boot from another hard drive, so I finally managed to shut it down properly. I’m still getting black screen of blinking cursor evil, but this is progress. I have the same issue with a blinking cursor after the bios on a Toshiba Satellite L655-S5096.

To make a long story short this laptop is for a client. I took out the hard drive and reformatted it on my computer using a tool I bought on eBay (Eforcity USB 2.0 to IDE / SATA Converter Cable). I put back the hard drive and still no go. I removed all the optical drives, ram, wireless card and battery then did one at a time and still a no go.

The laptop is running Win 7 So I popped the disk in tried the f2 and changed it to boot up on optical and still get the cursor blinking. Tried to hit f12 to and the screen comes up but after you select load from optical and there it went again with the blinking cursor. I even, tried to boot Win 7 from a bootable made USB and the same problem.

I can’t get a safe mode or anything to go at all. Once the bios screen is passed it goes blank and the cursor blinks.

I also hooked the laptop to an external monitor just to “x” out this problem and the same issue with the blinking cursor. After all this all I can think of is that the motherboard has a short or the CPU is bad.

Either way those parts are way too expensive and I would rather have the client buy a new computer. In the past 4 months I have had 4 Toshiba’s with similar motherboard related problems. Toshiba has a big problem on their hands.! After all this I said what the heck I took the entire laptop apart and removed the Cmos battery, processor, motherboard and all the other drives I had previously removed and just let it sit there. I cleaned out the heat sink and fan, after about 30 minutes I reinstalled everything back except for the Cmos battery. Note also on the CPU I put some thermal paste and then installed the heat sink with the fan. Well after all this I booted up the laptop and I still got the blinking cursor, BUT this time it only blinked like 10 times then it self booted my Windows 7 disk I had in the Cd-Rom drive.

I don’t know what it was but I finally got it to work. After I installed the new system I took the laptop apart and reinstalled the Cmos battery and the system still worked. Call it luck but the laptop issue with the blinking light was solved and I made 150.00 on the repair.! :pfff: Well:hello:, i m also struck with problem. My is Lenovo S-10 3, well it’s very nice and dependable laptop. But as far as this problem is conserned, My laptop, starts, goes to boot and then stop.

😥 *****what i would like to add other than up mentioned methods i have tried yet!! ***** As soon as i activate boot from hdd (on any position, in boot sequence) in the boot menu, everyother option become unbootable and end up with blank screen with blinking cursor; untill the next restart, where i have to go again in the boot menu and disable the hdd.:pt1cable: But i can boot from ln, usb, external hdd or cd. Only condition i have to disable the Hdd in the boot menu. Infact it seem, the computer is not able to reach hdd as the led light of hdd didn’t glow. *fixing boot mbr.

Didn’t resulted success. 😮 *Installing new os. Also didn’t work.

😮 *reseting cmos well, i still working on it. I am left 1 option to try, format everything and try, Format everything and male partitions a fresh and ten a clean install:non:. Hi there Wow you have done alot here I would test the hard drive by putting it in an external case (a 2.5″ One) and connecting it to another computer to see if you can access it.

These cases are under $10 and very handy to have. Also when your hard drive it out and bios is set to boot to the hard drive start the computer without it and see what the message is on the screen, if any. Another thing you can check is the ram.Just take one piece out.then trythen swap them around and try the other.

• Gorav says. Hello, so i bought a computer from studentcomputers it worked fine with the built in graphic card however suddenly after trying to turn it on one day, the screen went black straight awayy, keyboard or mouse did not work, and a long code was displayed at the top left. I’ve called student computers and they told me my built in graphic card was faulty therefore they told me to remove me and to try the normal graphic card which comes with the computer i have done that and it worked!!

However, after turning it off the next time it didnt work the problem is it doesnt even load anything straight away a black screen comes with the flashing cursor at the top left but this time without any code, once again no keyboard and mouse works. I have tried several re bootings + plugged all the cables out but it seems like it doesnt work.

When the computer worked did it everything work.like the keyboard and login all normal? What about the plugs. Are they in tightly. In the right spot for onboard video? Maybe there is a problem with your onboard video now. Can you try another keyboard?

If you could get into safe mode you could completely update drivers for the onboard video. What about trying a boot disc or your operating disc to do a repair? (not sure if you can if the keyboard not working) Another thing to do is get another video card to try in it.Maybe you can go to studentcomputers and ask them for one to try.

• Haider says. I recently got my Dell Inspiron Laptop I got an error while surfing online i restarted my laptop for some odd reason. And it doesnt seem to start anymore it keeps getting a black screen with a blinking curser on top left now. I am not sure what to do i read ur article thing but dunt seem to get what i should do for my part i have a f2 to get into setup when i press it theres a boot sequence in general settings where there are some options like Diskette Drive Internal HDD USD storage device CD DVD CD-RW Drive and Onboard NIC all are checkd but Onboard NIC (I just thought i should share that. ) now to the problem i cant go past the blinking curser idk wat to do please doo help!! My email is feel free to contact me there Theres nothing like system restore or anything.

Idk wat to do x.x all i have are the recovery disks i made when i got the laptop 3 months ago and a CD for dell inspiron software installer PLeasee I am so lost and I wana get this fixed before my exam comes. • renee says. Hi i just read your article, i too have the same problem today.a few days ago it said i shut off my virus protector and wouldnt let me turn it back on?? Said i wasnt allowed, so i finally did a system retore for before that date. And then i was on the net and it shut down on me and when i started it back up it was a black screen with a blinking cursorwhat the heck?

So did anyone answer your question? If it worked please let me know.

I have the cd to reinstall but having an issue trying to get it to work. Thanks so much, renee • Sarah says. I just wanted to say the same exact thing happened to my dell Inspiron laptop not too long ago. I actually didn’t even notice my norton protection programs were off until later.

While I was using my laptop it said I should shut it down for its safety or something and I when I started it up again it had a blue screen that flashed by then went into the whole safe mode or normally screen. If I tried to start normally, the blue screen flashed and back to the safe mode or normally screen again. So I went into safe mode and had to restore it. Worked fine after that, and then I curiously looked at my computer protection and finally noticed that norton wasn’t responding at all. It wouldn’t even show up if I clicked on it.- I had to download something to get rid of it, then reinstall it, but after that it was all good ^.^ Right now I’m having a problem, I turn on my computer, the dell logo flashes by when it loads, and I come to the black screen with the blinking cursor. Also, my laptop screen is broken, so for both the issue I had, and for this one, I have to rely on an old computer monitor.

Here’s my situation: I turn the computer on, it boots, it beeps, I get to the screen where I can get into BIOS/XpressRecovery/etc. However I cannot hit Del, F1, F2, F9, F12 etc. And get into bios or any sort of setup. Just says “prepare to enter setup” then continues to a blinking cursor in the upper left corner.

I tried taking out the mobo battery and setting up from there and I get two options (restore defaults/last working config), both take me to the same blinking cursor in the upper left corner. I’ve done all the take a stick of RAM out and try each one in the different slots, I’ve replaced the mobo battery with a new one along with a few other little things i read onlineRunning out of ideas here, any help is greatly appreciated! Setup: Mobo – Gigabyte GA-965P-S3 CPU – Intel Core 2 duo Graphics – HIS Radeon hd3780x2 RAM – G.Skill DDR2 RAM 2GBx2 PS – Antec 650W Ps/2 keyboard No mouse No USB devices connected • says. My pc is running windows xp. Im trying to boot from cd/dvd drive in order to install windows 7, i have changed the boot order so cd/dvd drive boots first. After i insert the disk and restart the pc, the black screen with flashing cursor comes on and sits there for about 20 seconds in the meantime i hear the disk spinning and the light flashing, all of the sudden the disk and flashing light stops, the black screen goes out and windows boots normal from the hd.

What could be the problem??? • Phyllis says. I’ve recently run into some booting issues as well.

I have Windows 7 and things seemed to be OK up until this weekend. I had gotten several system and software updates from Windows Update last week, and then later I got the really fun blue screen of death. I figured I’d run a chkdsk before things got worse. I chose the option to repair damaged sectors and was going to let it run overnight. Before I went to bed, it appeared to be stuck on step 5 at 13%.

I didn’t worry about it then, but when I got up several hours later, it was still at 13%. I managed to exit and shut down, but then Windows wouldn’t start I got my OS CD and went to the repair options and was going to try a system restore, but there were none!

I thought that was odd since it always creates them before updates. So now, since my lovely backup drive stopped working a little while back, I do not know what to do. I’m running another chkdsk from the boot CD, but it appears to be stuck at 13% again. What can I do?

So my feeble attempts at fixing were actually bad! Curses I know it’s definitely something with the hard drive, so I’ll have to replace that. Miraculously, a few restore points finally showed up upon a second attempt (I have no clue how that worked out), so I’m able to boot Windows OK now. I’ve got a new external hard drive and I’m backing things up.

Do you recommend getting a new hard drive altogether or should I look into the BootSuite program that you wrote about in your other entry that you linked, try some more diagnostics, and then ultimately format the drive? Would formatting get rid of the errors or whatever it may be?

Would I possibly be able to find out what the issue is with BootSuite? I also did a memory test, and it seems that’s fine for now.

I need to install some new RAM chips though. I’m stuck in the stone age with only 2GB xD. PS You’re my new favorite.

So amazingly helpful!! Hello, please answer me! I have a black screen with blinking cursor at the left top.

I already tried this: * – Everything on this article and others, * – Reinstaled windows (boots ok from dvd ) * – Instaled MAC OS and worked ok (hackintosh mode ) * – Disconected everything but the HD * – Disconected the graphics card * – Replaced the font * – Changed bios settings in every possible ways * – Replaced the HD (another windows instalations works, and the same hd works like a charm on another computers!! ) * – bla bla bla etc I can get into the setup of the windows dvd, instal it on had, but: Misteriously the internet works like a shit ( its not the problem, desactivated lan too ), Misteriously when I put another windows hd of another computer it works, (the internet keeps working like a shit and I have the feeling that computer is notd runing well. Misteriously after everything work fine ———————————- everything happens again!

The death black screem with the blinking cursor! What could this be? I think is a mobo malfunction, but what can I do? MAC OS runs perfectly on the PC, I think that my computer is now alergic to WINDOWS after instaled MAC OS • says.

Its working now, (until now) I just disabled the usb ports and the windows loaded, and I simply didnt did this before because I thought that in my particular case a computer without GOOD USB ports is not a useful computer and I didnt wanted to spend money with no sure of 100%. But misteriously, its working now with enabled USB ports, all I did was disable boot from USB, LAN, etc. =] Maybe it is just a misterious problem with my onboard USB, a pin, resistor etc wow. I am doing windows updates right now and I’ll keep you posted! Thank You Mitz!! Congratulations to you and your website!

Hi, I have a similar problem. Don’t know what has caused it. But, I can move the cursor and it even lets me log into the system with username and password. It gives me Ordinal 2000 error. Except for letting me log in it won’t let me do anything else neither does it show anything.

Same in safe mode as well. But it works fine with Ubuntu live CD(haven’t installed UBUNTU though). I can go into safe mode with command prompt so if there is anything that could be fixed from command I can give it a try. IDeally, reloading the OS and losing personal files isn’t an option. Please pls help me. I have restore points stored even a few days before the problem has occured, but restoring to previous date isn’t even progressing and it is failing.! Any help is much appreciated.

I hate to sound repetitious but after reading all of these, mine is a little different. I have a Dell PC, not laptop. I turn it on, it says Dell real quick, then goes to black screen and says I can push ctrl and enter to not use password, or just enter to use password, either one I push, it goes back to the password prompt.

When I try to enter a password the curser just keeps on blinking and will not enter any letter. When I try anyway and push enter it says to stop and halt and power down the computer. I power it down, turn it back on same thing. I cannot push f2, f12, f nothing, it has no affect. But enter will, so the keyboard is working. The lights are on, enter button works, but no other keys I hit act as if they are communicating. The computer will not respond.

Even if I knew the password I cannot even enter it. I don’t have the boot disc. I bought it refurbished and only used it once and then put it away for a year because I have a laptop.

I didn’t get online with it just checked it out. Wanted to use it for my son when he needed it for school. It had XP on it and seemed fine. I think it could be bios, I just can’t get into it to solve anything. I’ll look through my computer stuff and see if I can find that disc. I did have some boot discs for everything for my Dell laptop but not sure if those would be compatible?? Thanks again.

Hi need help with my emachines laptop and it’s for windows vista. The problem is that I don’t what exactly happened and when I turned it on it just showed a black screen with a small flashing line on the left side corner.

I don’t have a system operating disk and I don’t know what to do.??? I tried letting the battery die and taking out the battery. Download Free Norma Uni Iso 2859 1 Sampling. Then I put back the battery and plugging the battery cord. It still shows the flashing line and I can’t do anything!! When I hold a button it makes a noise help me!! Yesterday morning I woke up to the black screen with a blinking cursor, and that’s all I’ve been able to get since.

I located my repair disc and booted that from the CD/DVD Drive. Using the disc I first tried the system repair step. That step has only told me that if I recently connected an external device such as an MP3 player, I should disconnect and restart my computer.

I did have my i-pod connected to the computer when it apparently decided to go to the black screen with a blinking cursor, but that has been disconnected since I started trying to fix the problem. Nothing else external is plugged in. Re-starting the computer hasn’t worked, even after the system repair telling me to disconnect/restart. The log of the tests the system repair does indicates that the OS is booting properly, but that is obviously not the case. I then tried system restore, which failed a couple of times, but ultimately worked. However, the successful system restore has made no difference, as I still end up back at the black screen with blinking cursor.

The successful system restore also didn’t change the results of the system repair telling me to disconnect/restart. Any other ideas? • Godfrey says. Hello Mitz, I am having the same problem with the black screen and the blinking dash in the upper left hand corner. This started when PC Doctor told me to Reboot at the same time I was prompted to restart due to updates to the system (unsure the reason for the updates). So when the reboot began and the system restarted I ended up here with the black screen and the blinking dash.

I was able to bring up the BIOS Setup Utility on my computer but when I bring up the Boot device priority it shows the following: 1st BOOT DEVICE [1ST FLOPPY DRIVE] 2nd BOOT DEVICE [SATA:3M-WDC WD5000] 3rd BOOT DEVICE [CDROM:4M-TSSTcorp ] I am not sure as to whether or not I am in the correct screen on the BIOS or not because I also show a BOOT SETTINGS CONFIGURATION option in the BOOT tab. Please help me, this has been going on for almost 16 hrs now. I can follow any instructions you give me but I do not have a lot of computer knowledge. Thank you in advance.

I had the same thing happen to me yesterday after putting in updates on windows. It started when my computer was started up after shutting down for updates. I too don’t know alot about computers.

I was freaking cause I couldn’t even get into the computer to try a restore. I called a friend What we did to get into the computer. — Manually turn off computer (push button on tower), leave it for 4 seconds. This is where you have to be quick. Once you push the button, within 2 seconds you will see a blue screen, and at the bottom there are 3 things you can hit. F1, something else and. Esc is the key to hit (but you must do it right when the blue screen is on).

Right after you hit esc the computer will go to a black screen with has computer data. Then it will quickly give you another bluescreen with choices At this point hit the top one listed. This will load your windows for you. I know this doesn’t fix it for you but at least you can access you computer. Does this every time you shut off you computer and restart until you get it fixed.

For me I’m using this method till I can get the person who built my computer to fix my hard drive. As I believe in my case because of updating, it’s changes the configuration. Hope this at least helps. I have a similar problem. Using Windows XP my system boots to a black screen with a flashing cursor in the top left corner. When I boot using my Windows CD to attempt a recovery it tells me that there is no drive attached however when I boot using the Ultimate Boot Disk for Windows I can access the drive and see all my files.

I tried the solutions listed by making the drive the first option in the boot sequence and even removed my CD drive to make sure it wasn’t causing an issue. Any suggestions or tools available to fix? My omputer does this when it has been switched off for more than 10 minutes.

The only way i can get it to boot up is to unplug two of my harddrives and then turn on. I then wait till windows has loaded and switch off. Connect one harddrive back up, switch on, wait for windows switch off. PLug the second in and switch on and wait for windows. I have 4 harddrives and a Graphics card all needing power. Is my power supply on the blink. In Bios it is all set how it should be nothing has changed and power levels in Bios seem to be fine.

Talk about an adventure! There is no other way to say it! FIRST: Make sure all components are plugged in! SECOND: Then turn on. If it doesn’t start, systematically eliminate ALL external components from the motherboard all the way down starting with the hard drive, the cd-rom drives, and anything else. Start and restart with each removal.

If that doesn’t start your system up, then logically it will be the last thing you went to. My boyfriend and I had a fiasco with a new harddrive and he read off this post. From the beginning, I tried everything listed and come to find out it was loose memory from a previous repair by a local technician. Absolute IDIOT. SATA is so easy, no IDE bullpoop to confuse you-slave and master don’t exist.

AND A 1.5GB Processor Motherboard can be configured with a 3.0GB Harddrive WITHOUT A JUMPER!! Just know your SATA ports and go into BIOS (F2) and configure your Boot Sequence to: CD-ROM, then HARD DRIVE, and whatever else. Then configure your SATA on to what you hooked up on your motherboard. The numbers are on the motherboard for crying out loud! And they will match up to the ports you activate in your BIOS.

Who cares about all the other stuff if your’re a newb, this is for the uninitiated! Learn from this website, it rocked! Thanks so much for your help! This is a bit lengthy, but am at a loss After correctly installing new memory, when I booted up for the first time, I got the HP start up screen, and it froze in that position indefinately. After unplugging everything and checking memory installation for at least 12 times, an installation/restart info page came up.With a wireless keyboard and mouse(maybe unrelated) I could not do any prompts.

After shutting down, checking memory installation once again, I restarted, but only to a Black screen with a white flashing dash in the upper left hand corner. Also, as it was trying to boot up it made a patterned clicking that repeated 8 times. This now happens everytime I try to start it now.the black screen with the flasing dash, and the series of clicks PLEASE help!

Well depending on what Lenovo Supplied as a Recovery Option it could be a Key Combination when the Lenovo Screen is present to rebuild the system or it may involve Recovery Disc's. These are normally a DVD with Lenovo Rebuild or OS printed on their front. Regardless the instructions will be in the User Manual which is available here if you no longer have the one supplied with the system /shop/americas/content/user_guides/g470_g570_g575_ug_en.pdf As for using a Boot Disc this is a Bootable Disc that goes into the system and then when it is turned on the system boots off that Disc. A probleim like this usually could be as a result of one of two things.

Hardware With regards to software, if youre seeing the devive in 'my computer' or even the BIOS chances are that the device is set up correctly and the machine can recocognize it. Software issues ususally mean faulty ot incorrect drivers in which case it run a repair or restore You can do a resinstall of the driver by going through 'device manager'.

Make sure it is the exact driver for the device, For hardware related issues maybe dust got on the read head preventing it from reading the disc which is in it. Use one of these disc cleaners. Im also assuming that youve used different media which you are 'sure works'. If this does not work then more that likely its a defective drive in which case needs replacing.